Estate/ Driveway gates typically come in two configurations as well as being available in both aluminum and iron. A single gate and a double gate setup. For the purpose of Read More

Find all sorts of informative posts in here about our products, installation, special types of use for our products and what to look for when buying a fence.
Estate/ Driveway gates typically come in two configurations as well as being available in both aluminum and iron. A single gate and a double gate setup. For the purpose of Read More
Looking for a way to customize the look of your fence or gate, but don’t want to wait for a custom job? Take a look at our add-on adornments/ decorations. We have several styles Read More
With a vast majority of our customers being DIY-ers (do-it-youselfers), we get this question quote often. To start, we offer something no other manufacturer does: a free Read More
We get a lot of questions on if the tips on our fence are pointy and sharp. The tips are Read More
Any dog owner knows that keeping your dog safe outside is a primary concern. Especially Read More
Looking to mount your iron or aluminum fence to something other than the posts we provide? Read on to see if brick, stone, wood or masonry pillars or columns are something you can use in their place.
Most yards have some level of grade to them. This can be anything from a slight variation Read More
The main things you will want to check in advance are:
There are several options to go about this, but we will discuss the two most common: flange/ deck mount posts and core-drilling.
The first is a flange post. Our iron posts have a 5? square flange welded to the bottom of a steel post with four holes drilled for mounting. As you can see in the photo, it?s basically a ?foot? welded to the metal post bottom at ground level, allowing it to stand freely and be bolted to a flat surface.
You have several hardware options for mounting your own fence post, but we like concrete wedge anchors the best since they are the most stable. Not familiar with concrete wedge anchors? The following link has some info and a short video on how to install them:
https://www.concretefasteners.com/anchors-fasteners/thunderstud-wedge/installation.aspx
The second option is core-drilling your surface. The core drill method bores out a cylindrical post hole, and you put the post in the hole. Instead of using cement, the fence post is set in a mortar/ grout material such as Por-Rok. The core drill tool can often be rented from a tool rental store. The depth the post is set down varies based on the application and post location. If it?s going on your own concrete mix surface in your patio, you do not want to drill through the bottom. You need the rigidity of the sides and bottom to set your fence post.
So, which is the better option for mounting a fence post on a concrete surface or wall? Well, that really depends on your layout. Core drilling is far stronger than a flange post. However, flange posts are easier to install and do not require any special tools like a post hole digger. Both methods are acceptable, but how you want the final product to look and your exact situation may influence which is the better choice.
Not sure how to proceed? Give us a call at 800-261-2729 or email us at [email protected] and we would be happy to work with you to offer suggestions.